Embossed fabric
Obtained by pressing Aeria* between two rollers, the “embossing” literally crushes the pattern into the textile to produce an effect similar to “damask” weaving. The visibility of the pattern varies depending on the orientation of the object and how it is lit. Embossed Aeria* fabric is available in two patterns:

- Croco in the “écorce” colour, MR 210C
- Rococo in the “écru” MR 800R and “rouge pourpre” MR 870R colours.

Prepared for a light fitting for rigid acoustic panels
This option converts the Stereo acoustic panels into dual-function
devices - acoustic control and illumination.
(Please specify the exact dimensions).

Cable passageway for supple acoustic panels
(16 mm diameter hole) position to be specified. One cable passageway is recommended for the 1,196 mm panel, two passageways for the 1,796 and 2,396 mm panels.

“Padded-effect” button
1 fabric-covered button with dimensions of: 1,196 x 596 x 50 mm & and 1196 x 1196 x 50 mm
2 fabric-covered buttons with dimensions of: 1,796 x 596 x 50 mm & and 2396 x 1196 x 50 mm

Rounded edges /Bevelled edges
+ 50 mm compared with the dimensions of the panels
Two possible finishing options, rounded and bevelled edges, to create a lighter feel for the panel and to soften the rough, rectangular shapes of the rigid panels.

Top face fabric covered
For a complete visual finish, this option covers all 6 faces of the panels.

Digital printing
Customise the Stereo object by digitally printing text, logos or images directly onto the fabric.

Brushed stainless steel “padded-effect” buttons
Brushed stainless steel buttons, 60 x30 mm 3 mm thick
(Only for supple panels)

Methacrylate window
To create an opening in an acoustic wall, order a methacrylate window 380 x 380 x 6 mm thick.

Cable length of 3,000 mm
For high ceilings, there is an option to order a cable length of 3,000 mm.

.